Maintain the hydraulic system of the injection molding machine through five steps. Pay attention to the amount of hydraulic oil, the temperature of the hydraulic oil, the quality of the hydraulic oil, and the cleaning of the oil filter and the cooler.

It is necessary to replace the extruder bearing in time if it is damaged. The disassembly and installation procedure is similar to replacing the screw and barrel, except that the screw and barrel do not need to be lifted off the equipment frame.

Before throwing away a bucket, check that it is likely to be repaired and used again for storage and transport.

Inspector is responsible for product quality control of injection molding process according to order requirements or corresponding process documents.

The temperature setting of plasticizing system is determined by the characteristics of raw materials and machines, and is also affected by the ambient temperature.

(2021) The 13th Issue
Compiled and issued by Changzhou Plastics Factory Co., Ltd July 2, 2021

The working state of contactors in temperature control system is somewhat different from that of other motor contactors.

The working state of contactors in temperature control system is somewhat different from that of other motor contactors.